Jxin 70 is a one-component acrylic clear protective lacquer that forms a glossy, stretchable protective film on a variety of printed circuit boards. It can prevent the erosion of weak acid, alkali, alcohol, mold, salt spray, thermal stress, ultraviolet light, moisture, and insects. This product is resistant to high temperatures and will not drip when exposed to heat. It can be soldered directly on the protective film. Fully in line with EU ROHS directive requirements.

JxB-120 is a one-component, new environmentally friendly nano-protective coating designed to protect printed circuit boards that operate in harsh environments using US technology. Excellent resistance to high and low temperature, aging, corrosion resistance and electrical properties. This product is currently the first nano-protective coating in China. Its comprehensive performance and quality are much better than imported similar products, and the cost is lower than traditional products.

It is widely used in various electronic components, IC chips, and assembled circuit boards to protect the wire boards from harsh environmental impacts such as various chemicals, salt spray, moisture, electrical insulation, dust, vibration and high and low temperature.

Product Usage:
After curing, it is dust-proof, insulated, moisture-proof, anti-corrosive, and prevents micro-bacteria from being produced. It has excellent effects. At the same time, it avoids the oxidation, leakage and short circuit of the bare pad solder joints. Surface curing in 10-20 minutes, complete curing in 24 hours, convenient and quick operation. Therefore, it is widely used as a three-proof protection product for hybrid integrated circuits, electronic circuit boards, computer control boards, industrial control boards, home appliance controllers, and other electronic components.

Features:
Excellent substrate adhesion
Conforms to EU ROHS and REACH standards
Quick dry at room temperature
Excellent resistance to micro-bacteria growth and UV light, long-term in tropical or salt spray environment, high gloss and transparency
Excellent dielectric properties
UV-containing indicator, antibacterial agent
Non-corrosive to aluminum plates, zinc plates and electronic components (excluding phenolic substances)
The material is resistant to most organic solvents and will be able to be welded directly through soldering tools, making maintenance easier.

Features:
1. A-2500 is an elastoplastic silicone resin that cures at room temperature and can be accelerated by heating. This product is easy to operate: it is suitable for brushing, spraying and dip coating. It has fast curing speed, excellent abrasion resistance and good adhesion to various circuit boards.
2. It has good resistance to high and low temperature; it forms a transparent elastic protective film after curing, which has superior properties of insulation, moisture, water, leakage, shock, dust, corrosion, aging and corona resistance. It can enhance the moisture-proof and anti-fouling ability of electronic circuits and components, prevent solder joints and conductors from being eroded, and can also shield and eliminate electromagnetic interference, prevent short circuit, and improve the insulation performance of circuit boards. In addition, the protective coating film also contributes to the abrasion resistance and solvent resistance of the wires and components, and releases the pressure caused by periodic changes in temperature.

Jxin588 is a paste-like one-component room-temperature-curing silicone rubber. Neutral curing emits low-molecular crosslinking by reacting with moisture in the air to form a high-performance elastomer. For most metals, plastics are non-corrosive and have good adhesion. Excellent resistance to cold and heat, aging and electrical insulation, excellent moisture, water, shock, corona and leakage resistance performance. Fully in line with EU ROHS directive requirements.

JXin586 is a paste-like one-component room-temperature curing silicone rubber. It is non-corrosive to most metals and plastics and has good adhesion. It has excellent resistance to cold and heat, aging and electrical insulation. Excellent moisture, water, shock, corona and leakage resistance. Fully in line with EU ROHS directive requirements.

JXin591 is a semi-flow, one-component, room-temperature-curing silicone rubber. Neutral curing condenses into a high-performance elastomer by condensing with water to release low molecules to cause cross-linking. For most metals, plastics are non-corrosive and have good adhesion. Excellent resistance to cold and heat, aging and electrical insulation, excellent moisture, water, shock, corona and leakage resistance performance. Fully in line with EU ROHS directive requirements.

JXin592 is a semi-flow, one-component, room-temperature-curing silicone rubber. Neutral curing, by condensation with water in the air, releases low molecules to cause cross-linking and vulcanizes into a high-performance elastomer. For most metals, plastics are non-corrosive and have good adhesion. Excellent resistance to cold and heat, aging and electrical insulation, excellent moisture, water, shock, corona and leakage resistance performance. Fully in line with EU ROHS directive requirements.

It is used for potting protection of high-power electronic components, module power supply and circuit board with high heat dissipation and temperature resistance. Such as module potting, automotive HID lamp module power supply, car ignition system module power supply, solar panels, transformers, sensors and so on.

This product is a room temperature curing environment-friendly epoxy potting compound with moderate viscosity, good fluidity and easy penetration into the gap of the product.
It can be cured at room temperature or medium temperature, and the curing speed is moderate.
No bubbles after curing, smooth surface, good gloss and high hardness.
The cured product has flame retardant properties, good acid and alkali resistance, moisture, water, oil, dust and water resistance, resistance to warmth and atmospheric aging.
The cured product has good electrical and physical properties such as good insulation, compression resistance, and high bonding strength.

Performance, features:

      * It is a two-component epoxy resin suitable for bonding, sealing and laminating various substrates.

       * High strength, chemical resistant medium, fast curing and high thixotropy.